This 9mm chambered 4.5 inch Modern Series Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and 1/2-28 x .400 full profile threads.
- Designed to work with both Colt/RR and Glock style AR builds.
- Compatible with standard mil-spec uppers. There are also numerous dedicated 9mm upper options that work.
- Requires the use of a unique magwell conversion (Colt/Rock River style) with UZI mags or a dedicated 9mm lower with Glock mags.
- 9mm on an AR15 platform operates by blowback and does not need a gas block or gas tube.
- Threaded 1/2x28 instead of 1/2x36 to give you greater versatility when choosing a suppressor.
- Integrated feed ramp and barrel extension.
- Since the “barrel extension” is an integral part of the barrel, the length stated is the true overall length. For example, an 11” 9mm barrel has the same outer dimensions/length as a 10.5” 5.56 barrel.
- IMPORTANT: A standard 1/2x28 flash hider will not have enough clearance for a 9mm round to pass.
- Before installing a muzzle device, ensure a 9mm round will drop freely through the muzzle device bore.
You may use this barrel with a lower receiver that is a Registered SBR, Machine Gun, or Pistol. Possession of this barrel along with a Non-NFA lower receiver is Prohibited, except when installed on a Pistol configuration firearm.
Additional Info
| Length |
4.5" |
|---|
| Material |
4150 Chrome Moly Vanadium |
|---|
| Profile |
Straight |
|---|
| Finish |
QPQ Corrosion Resistant |
|---|
| Gas System Length |
Blowback |
|---|
| Gas Block Journal |
Blowback Gas System - No Gas Block |
|---|
| Twist Rate |
1:10 inches |
|---|
| Muzzle |
1/2x28 Threaded |
|---|
| Weight |
8.1oz |
|---|
