Strike X-Comp: A line of muzzle devices and adapters for various fitments.--
The Strike X-Comp Element C is a muzzle brake specifically designed for the CZ Scorpion EVO 9mm blowback system with use of the CZ click stop latch found on the factory muzzle brake when using the CZ OEM handguard. The X-Comp Element C includes a Strike Industries Jam Nut in M18x1 RH thread to give you an easier way to assist in the installation and timing of a muzzle device without the CZ click stop latch when an aftermarket Scorpion handguard is used. The Element C utilizes smaller port cuts since 9mm propellant burns much quicker so the gases reach maximum expansion much sooner and in a much smaller volume. The port cuts help reduce rearward recoil velocity by applying forward pressure opposite to the direction of the recoil. The Element C will install into a CZ Scorpion EVO barrel retaining nut and any other M18x1 RH threaded barrel. The Strike X-Comp Element C is SI OPPRESSOR compatible and when paired with available Strike X-Comp Thread Adapter Kits (sold separately), the X-Comp Element C can be paired with available Strike X-Comp Thread Adapter Kits (sold separately) to be used with other threaded barrels and is multi-caliber with 9mm, .223, 5.56, .308 and 7.62. For for use with a Kalashnikov USA™ KP-9, purchase the Strike X-Comp Thread Adapter Kit (1/2”-28 TPI – M18x1 RH) (sold separately) and this Mini Cookie Cutter 02 can be used with the AK detent notch on the KP-9. For those with a SIG SAUER® MPX, purchase the Strike X-Comp Thread Adapter Kit (SIG MPX – M18x1 RH) (sold separately). For all others, a Strike X-Comp Thread Adapter kit in 1/2"-28 TPI or 5/8"-24 TPI is also available.
COMPATIBILITY:
-CZ Scorpion EVO w/ or w/o click stop latch
-M18x1 RH thread pitch
-Kalashnikov USA™ KP-9 w/ purchase of Strike X-Comp Thread Adapter Kit (1/2"-28 TPI - M18x1 RH)
-SIG SAUER® MPX w/ purchase of Strike X-Comp Thread Adapter Kit (SIG MPX - M18x1 RH)
-Strike X-Comp Thread Adapter Kits (1/2"-28 TPI & 5/8"-24 TPI)
-SI OPPRESSOR
